logo
محصولات
خانه / محصولات / تست تجهیزات آزمایشگاهی /

EN 13036-4 Compliant Pendulum Slip Resistance Tester for Road and Airfield Surface

EN 13036-4 Compliant Pendulum Slip Resistance Tester for Road and Airfield Surface

نام تجاری: Skyline
شماره مدل: SL-FL609
موق: 1
قیمت: قابل مذاکره
شرایط پرداخت: T/T، L/C، D/A، D/P، Western Union، MoneyGram، نقدی
توانایی عرضه: 30 واحد در ماه
اطلاعات دقیق
محل منبع:
چین
گواهی:
CE, Rosh, Calibration
وزن آونگ::
1500 گرم ± 30 گرم
فاصله از مرکز ثقل آونگ تا انتهای آن:
410 میلی متر ± 5 میلی متر
فشار استاتیک ورق لاستیکی روی زمین:
0.5 ± 22.2 نیوتن
0.5 ± 22.2 نیوتن:
126 میلی متر ± 1 میلی متر
فاصله از لبه پایینی ورق لاستیکی تا مرکز چرخش آونگ:
510 میلی متر ± 2 میلی متر
ابعاد ورق لاستیکی:
6.35mm x 25.4mm x 76.2mm
سختی ساحلی ورق لاستیکی:
5 ± 55 HD
اشاره کننده:
وزن ≤85 گرم، طول 300 میلی متر ± 1 میلی متر
زاویه بین ورق لاستیکی و افقی:
26 ± 3 درجه
بعد ماشین:
620*450*590 (حدود 14 کیلوگرم)
جزئیات بسته بندی:
کیس تخته سه لا
قابلیت ارائه:
30 واحد در ماه
برجسته کردن:

EN 13036-4 compliant slip tester,pendulum slip resistance tester,road surface slip testing equipment

,

pendulum slip resistance tester

,

road surface slip testing equipment

توضیح محصول
EN 13036-4 Compliant Pendulum Slip Resistance Tester for Road and Airfield Surface
EN 13036-4 Pendulum Slip Resistance Tester
EN 13036-4 Compliant Pendulum Slip Resistance Tester for Road and Airfield Surface 0 EN 13036-4 Compliant Pendulum Slip Resistance Tester for Road and Airfield Surface 1 EN 13036-4 Compliant Pendulum Slip Resistance Tester for Road and Airfield Surface 2 EN 13036-4 Compliant Pendulum Slip Resistance Tester for Road and Airfield Surface 3
Product Introduction

This product is primarily used for friction coefficient detection in high-grade highways, laboratories, and airport runways. It can also evaluate the anti-slip performance of rubber runways, floor tiles, and other materials requiring anti-slip properties. The tester can assess road surface anti-slip performance (with options to adjust film hardness to 96 or modify normal static pressure from 22.2N to 24.5N). Additionally, it determines the polishing value of test pieces after stone material accelerated polishing machine tests. The pendulum tester serves as the testing instrument for stone material accelerated polishing machines.

Standard: EN 13036-4
Technical Parameters
Parameter Specification
Weight of pendulum 1500g ± 30g
Distance from the center of gravity of pendulum to the end 410mm ± 5mm
The static pressure of the rubber sheet on the ground 22.2N ± 0.5N
Sliding length of pendulum on the road surface 126mm ± 1mm
Distance from the lower edge of the rubber sheet to the swing center of the pendulum 510mm ± 2mm
Dimension of rubber sheet 6.35mm x 25.4mm x 76.2mm
Shore hardness of rubber sheet 55 ± 5 HD
Pointer Weight ≤85g, length 300mm ± 1mm
The Angle between the rubber sheet and the horizontal 26 ± 3°
Machine Dimension 620*450*590mm (About 14kg)
Part List
  • Scaleplate ×1
  • Spray bottle ×1
  • Squeegee ×1
  • Pendulum friction slide & Rubber sheet ×1:
    • For Road surface: 6.35mm x 25.4mm x 76.2mm
    • For coarse aggregate: 31.75mm x 25.4mm x 6.35mm (Optional)
  • Rubber sheet ×1:
    • For Road surface: 6.35mm x 25.4mm x 76.2mm, 55HD/94HD (Optional)
    • For coarse aggregate: 31.75mm x 25.4mm x 6.35mm, 55HD/94HD (Optional)